Módulo GPS GY-NEO6MV2 Controle c/ Eprom + Antena (U-BLOX)
€24,95
Adicionar ao Carrinho de Compras- SKU :: FUN-MD9038
- Tipo:: Arduino - Funduino
- Marca:: Funduino
Descrição
GPS Module NEO-6M Model: GY-GPS6MV2 Input Supply Voltage Range: 3.3V-6V, on board voltage regulator maintains 3.3V I/O Maximum Logic Level: 3.6V WAAS (Wide Area Augmentation System) enabled GPS unit. 27 seconds to first fix (TTFF) for cold starts On board LED will blink after module acquires a position fix and will continue blinking as long as the module has a fix 50 Channel NEMA GPS receiver UART: 9600 baud by default, but is configurable from 4800 to 115200 baud 5Hz max update rate External EEPROM for configuration storage Four plated mounting holes, 3mm in diameter One additional non-plated mounting/antenna cable hole, 4mm in diameter Position Accuracy: 2 m and better with multiple good satellite signals Velocity Accuracy: 0.1 m/s Maximum Velocity: 500 m/s Heading Accuracy: 0.5 degrees while moving On board battery for battery backed RAM (BBR). Battery is recharged through a simple diode and resistor charger circuit from the on board voltage regulator´s 3.3V output Ceramic antenna -156dBm Hotstart sensitivity Weight: 17.6g (0.6oz) Dimensions of GPS Module: 36mm (1.42in) x 25.8mm (1.02in) x 4mm (0.16in) Dimensions of Antenna: 25.5mm (1in) x 25.5mm (1in) x 8.8mm (0.35in) Compatible with various flight control modules that provide GPS computer test software Compatible with UART capable devices including Arduino, Raspberry Pi, MSP430, and MSP432. Interface: RS232 TTL